The 1970 Mercury Cougar Eliminator was one of the more eccentric offerings from the Mercury’s line of muscle cars. Cougar was launched for the 1967 model year as Mercury’s version of Ford’s original Mustang pony car. In keeping with Lincoln-Mercury’s upscale mission, the Cougar rode a Mustang chassis that had been stretched three inches to give the car a 111-inch wheelbase and a more boulevard ride. Additional sound-deadening material and some extra amenities were added in an effort to capture more of a sports-luxury-touring feel.
While the Cougar would always be a beat behind the lighter, more lithe Mustang in all-out performance, that didn’t stop Mercury from sharpening its cat’s claws. Right from the start, the Cougar GT and XR-7 offered a choice of powerteams that included the 289-cubic-inch two- and four-barrel V-8s, and the 390 High Performance V-8. (The 271-horsepower High Performance 289 V-8 never was available as a Cougar option.)
![]() The best-balanced 1970 Mercury Cougar Eliminator package had the 351-cid V-8, which had 300 bhp. |
Cougar received mild styling alterations for 1970, the biggest change being at the front, where the grille was split by a nose-like protrusion. Mercury’s sales brochure called Eliminator the “road animal,” and promoted a series of staged hop-up kits available at dealers: the Impressor, the Controller, and the Dominator.
As in 1969, Cougar’s grille and headlamp doors received a matte black treatment to emphasize the Eliminator’s performance profile. Eliminator side stripes moved from the beltline to the upper bodyline, running the full length of the car. Styled steel wheels remained standard, along with the functional ram-air hood scoop with the 428 CJR only.
Changes under the hood for 1970 included the deletion of the
390 Hi-Po engine from the option sheet. Ford’s new 351 cubic-inch V-8, known as
the
For 1970, both the 3.91:1 and 4.30:1 axle ratios earned buyers a Drag Pak option that included the 428 Super Cobra Jet with 335 horses and an engine oil cooler. The Boss 302 also carried an oil cooler. Boss 302 upgrades this year included cast aluminum valve covers and revised cylinder heads for better low-end torque and emissions.
The 1970 sales brochure listed the 429 Boss engine, rated 375 horsepower at 5200 rpm, as an Eliminator option. But Ford’s Kar Kraft facility, where 1969-70 Boss 429 Mustangs were built, is known to have assembled only two 1970 Cougar Eliminators with Hemi-head Boss 429 V-8s.
Wringing out a ’70 Boss 302 Eliminator, Car Life came to much the same conclusion as earlier testers. “Like the GTOs we tested,” it said, “the Cougar has grown too big and plush to be able to roll up its sleeves and scrap with the new, young tough stuff.” Car Life found the 302 overmatched by the Eliminator’s heft. It also concluded that the big-blocks would do little but add more weight in the wrong place and would spin the tires too much to contribute to really good ETs. So it advised ordering the 351.
Still, not many buyers got the message. Production for 1970 was just 2200 units and the Cougar would grow even larger for ’71, abandoning any pretention as a street fighter.
Engine Type | V-8/Cleveland |
Displacement (cid) | 351 |
Horsepower @ rpm: | 300 @ 5400 |
Torque (pounds/feet) @ rpm | 380 @ 3400 |
Compression Ratio | 11.0:1 |
Bore (inches) | 4 |
Stroke (inches) | 3.5 |
Valve Lifters | Hydraulic |
Availability | Optional (1970) |
Times*:
0-60 mph (sec) | 7.6 |
0-100 mph (sec) | 21.1 |
1/4-mile (sec) | 15.8 @ 90 mph |
Top speed (mph) | 104 |
Axle ratio | 4.30:1 |
Engine type | Boss 302 |
*Source: Car Life (April 1970), Road Test (September 1969)
Return to Classic Muscle Cars Library.
For more information on muscle cars, check out:
- Muscle Cars: Get information on more than 100 tough-guy rides.
- How Muscle Cars Work: Learn about the complete history of muscle cars, from the classic period in the 1960s to today.
- Mercury Muscle Cars: Find out about more great Mercury muscle cars.